How To Flash Samsung Grand Prime G530H Clone MT6572__alps__hexing72_cwet_lca__hexing72_cwet_lca__4.4.2_

Guide To Flash Samsung Galaxy Grand Prime Clone mt6572 Tested Solution Via Mtk SP Flashtool, Paid Firmware.

MT6572__alps__hexing72_cwet_lca__hexing72_cwet_lca__4.4.2__ALPS.KK1.MP7.V1.7

About Phone:

Brand: alps
ProdName: hexing72_cwet_lca
ProdModel: hexing72_cwet_lca
Device: hexing72_cwet_lca
AndroidVer: 4.4.2
MTKxCPU: MT6572
MTKxPRJ: ALPS.KK1.MP7.V1.7
Preloader_hexing72_cwet_lca.bin

Check Scatter partitions info in the end of article

PRE-REQUISITE

This is for Mtk Smartphone only.

Your device must have 70% Of battery.

You need a Laptop or PC to perform this Action.

Download the right firmware for your Mtk Smartphone from the link bellow.

Make sure you have followed the steps properly. Don’t Skip and Read!

We are not responsible for any damage that you make to your Phone.

WHY YOU NEED TO FLASH YOUR PHONE!!

You need this firmware/stock rom if you have encountered this kind of problem in your Smartphone Listed Below:

Hang on logo.

Rebooting.

Bootloop & Dead boot after a wrong software.

Virus & Sexual Apps.

System crashing.

How to know if the phone had a hard problem (Emmc problem)??

What is Emmc problem? also called read mode only, it means that your internal memory doesnt accept command, so the phone stay on the same condition after a software or a hard reset.

if the phone hang on logo after flash, you ara facing Emmc problem.

As a precaution you shouldn't change setting in SP flashtool from Download only to format+download, you will end with a dead phone if you have a Emmc problem ofcourse.

DOWNLOAD AREA:

Firmware Download Link: From freemobilefirmware shop

SP Flashtool Downloadlink: SPFlashTool 5.1516

Drivers Download Link: Mobile Mtk Drivers

REMARQUE:

MAKE BACKUP BEFORE FLASH

How To Flash Via SP FLASHTOOL?
1-Requirements:

A Computer PC Run Windows XP or above
Usb data cable (not a generic cable)
Mtk usb drivers installed manually, you will find instruction bellow
Your Mtk Smartphone Face a soft issue
Original stock rom (you can find it above in download section)
The latest SP Flashtool version

2-How to install VCOM Drivers:
Open device manager from my PC or my computer.

Click on any item and go to actions > Add legacy hardware

Now, press next and select install drivers manually

Press next and click on have disk

from the browse option, select VCOM drivers From mtk drivers folder

Once its done. You will see a screen similar to this:
- Once you are done with the driver installation, go to device manager > Ports (COM&LPT) you will find a device similar to this:
3-How to flash rom using SP Flashtool?:
Power the phone off, remove the battery from the smartphone and put it back without booting the phone (if the battery is inside then simply switch it off).
Launch SP Flashtool
*Double clicks onFlash_tool.exe

*Press OK
*Click on scatter-loading option and browse to the scatter file of your stock rom choose MTxxxx_android.txt (scatter.txt).

-Dont touch any options, Keep the original setting (In case you want to format device before flash press choose format+download but it'snt recommanded because you will be ended with an EMEI null)

-If you phone is alive and has a software issue (contain virus, Stuck on logo, apps setting problem, blink, or not work as expected) I advise you to Uncheck Preloader as a precaution. On contarary check all pertitions if you have a boot problem (you phone does'nt boot when you try to power on it).

*Once you are done with everything, click on the download button at the top of the software.

-Stop should now be prominent while other options should be grayed out

*Connect your switched off phone with battery inside to PC via Usb cable
A progressbar should start running

In the end of an success flash process, a box should show up with green OK symbol inside
Disconnect the phone, remove the battery, slot it back in then power the phone.

ENJOY.

SCATTER INFO:

partition_index: SYS0
  partition_name: PRELOADER
  file_name: preloader_hexing72_cwet_lca.bin
  is_download: true
  type: SV5_BL_BIN
  linear_start_addr: 0x0
  physical_start_addr: 0x0
  partition_size: 0xC00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: BOOTLOADERS
  reserve: 0x00

- partition_index: SYS1
  partition_name: MBR
  file_name: MBR
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0xC00000
  physical_start_addr: 0xC00000
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

- partition_index: SYS2
  partition_name: EBR1
  file_name: EBR1
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0xC80000
  physical_start_addr: 0xC80000
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

- partition_index: SYS3
  partition_name: PRO_INFO
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0xD00000
  physical_start_addr: 0xD00000
  partition_size: 0x300000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: PROTECTED
  reserve: 0x00

- partition_index: SYS4
  partition_name: NVRAM
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x1000000
  physical_start_addr: 0x1000000
  partition_size: 0x500000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: BINREGION
  reserve: 0x00

- partition_index: SYS5
  partition_name: PROTECT_F
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x1500000
  physical_start_addr: 0x1500000
  partition_size: 0xA00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: PROTECTED
  reserve: 0x00

- partition_index: SYS6
  partition_name: PROTECT_S
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x1F00000
  physical_start_addr: 0x1F00000
  partition_size: 0xA00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: PROTECTED
  reserve: 0x00

- partition_index: SYS7
  partition_name: SECCFG
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x2900000
  physical_start_addr: 0x2900000
  partition_size: 0x20000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00

- partition_index: SYS8
  partition_name: UBOOT
  file_name: lk.bin
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x2920000
  physical_start_addr: 0x2920000
  partition_size: 0x60000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

- partition_index: SYS9
  partition_name: BOOTIMG
  file_name: boot.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x2980000
  physical_start_addr: 0x2980000
  partition_size: 0x600000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

- partition_index: SYS10
  partition_name: RECOVERY
  file_name: recovery.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x2F80000
  physical_start_addr: 0x2F80000
  partition_size: 0x600000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

- partition_index: SYS11
  partition_name: SEC_RO
  file_name: secro.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x3580000
  physical_start_addr: 0x3580000
  partition_size: 0x40000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

- partition_index: SYS12
  partition_name: MISC
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x35C0000
  physical_start_addr: 0x35C0000
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00

- partition_index: SYS13
  partition_name: LOGO
  file_name: logo.bin
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x3640000
  physical_start_addr: 0x3640000
  partition_size: 0x300000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

- partition_index: SYS14
  partition_name: EXPDB
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x3940000
  physical_start_addr: 0x3940000
  partition_size: 0xA00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00

- partition_index: SYS15
  partition_name: ANDROID
  file_name: system.img
  is_download: true
  type: EXT4_IMG
  linear_start_addr: 0x4340000
  physical_start_addr: 0x4340000
  partition_size: 0x25800000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

- partition_index: SYS16
  partition_name: CACHE
  file_name: cache.img
  is_download: true
  type: EXT4_IMG
  linear_start_addr: 0x29B40000
  physical_start_addr: 0x29B40000
  partition_size: 0x6400000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

- partition_index: SYS17
  partition_name: USRDATA
  file_name: userdata.img
  is_download: true
  type: EXT4_IMG
  linear_start_addr: 0x2FF40000
  physical_start_addr: 0x2FF40000
  partition_size: 0x25800000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

- partition_index: SYS18
  partition_name: FAT
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x55740000
  physical_start_addr: 0x55740000
  partition_size: 0x197E0000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00

- partition_index: SYS19
  partition_name: BMTPOOL
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0xFFFF00A8
  physical_start_addr: 0xFFFF00A8
  partition_size: 0x1500000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: false
  is_reserved: true
  operation_type: RESERVED
  reserve: 0x00

Pages

FirmwareDownload-Database of Android Flash Files

About

Brand Category

Navigation

How To Flash Samsung Grand Prime G530H Clone MT6572alpshexing72_cwet_lca__hexing72_cwet_lca4.4.2ALPS.KK1.MP7.V1.7

post

It looks like you're using an ad blocker. That's okay. Who doesn't?