Guide To Flash Samsung Galaxy Grand Prime Clone mt6572 Tested Solution Via Mtk SP Flashtool, Paid Firmware.
About Phone:
MT6572__Samsung__SM-G530H__SM-G530H__4.4.2__S538FW_4.4_V1.6
- Brand: Samsung
- ProdName: SM-G530H
- ProdModel: SM-G530H
- Device: SM-G530H
- AndroidVer: 4.4.2
- MTKxCPU: MT6572
- MTKxPRJ: S538FW_4.4_V1.6
- BaseBand: MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V43_P3_1_wg_n
You need more info, Check Scatter partitions info in the end of article.
PRE-REQUISITE
PRE-REQUISITE
- This is for Mtk Smartphone only.
- Your device must have 70% Of battery.
- You need a Laptop or PC to perform this Action.
- Download the right firmware for your Mtk Smartphone from the link bellow.
- Make sure you have followed the steps properly. Don’t Skip and Read!
- We are not responsible for any damage that you make to your Phone.
WHY YOU NEED TO FLASH YOUR PHONE!!
You need this firmware/stock rom if you have encountered this kind of problem in your Smartphone Listed Below:
- Hang on logo.
- Rebooting.
- Bootloop & Dead boot after a wrong software.
- Virus & Sexual Apps.
- System crashing.
How to know if the phone had a hard problem (Emmc problem)??
- What is Emmc problem? also called read mode only, it means that your internal memory doesnt accept command, so the phone stay on the same condition after a software or a hard reset.
- if the phone hang on logo after flash, you ara facing Emmc problem.
- As a precaution you shouldn't change setting in SP flashtool from Download only to format+download, you will end with a dead phone if you have a Emmc problem ofcourse.
DOWNLOAD AREA:
Firmware Download Link: From freemobilefirmware shop
SP Flashtool Downloadlink: SPFlashTool 5.1516
Drivers Download Link: Mobile Mtk Drivers
REMARQUE:
MAKE BACKUP BEFORE FLASH
1-Requirements:
- A Computer PC Run Windows XP or above
- Usb data cable (not a generic cable)
- Mtk usb drivers installed manually, you will find instruction bellow
- Your Mtk Smartphone Face a soft issue
- Original stock rom (you can find it above in download section)
- The latest SP Flashtool version
- 2-How to install VCOM Drivers:
- Open device manager from my PC or my computer.
- Click on any item and go to actions > Add legacy hardware
- Now, press next and select install drivers manually
- Press next and click on have disk
- from the browse option, select VCOM drivers From mtk drivers folder
- Once its done. You will see a screen similar to this:
- Once you are done with the driver installation, go to device manager > Ports (COM&LPT) you will find a device similar to this:
3-How to flash rom using SP Flashtool?:
Power the phone off, remove the battery from the smartphone and put it back without booting the phone (if the battery is inside then simply switch it off).
Launch SP Flashtool
*Double clicks onFlash_tool.exe
*Press OK
- *Click on scatter-loading option and browse to the scatter file of your stock rom choose MTxxxx_android.txt (scatter.txt).
- for
- -If you phone is alive and has a software issue (contain virus, Stuck on logo, apps setting problem, blink, or not work as expected) I advise you to Uncheck Preloader as a precaution. On contarary check all pertitions if you have a boot problem (you phone does'nt boot when you try to power on it).
*Once you are done with everything, click on the download button at the top of the software.
-Stop should now be prominent while other options should be grayed out
*Connect your switched off phone with battery inside to PC via Usb cable
A progressbar should start running
In the end of an success flash process, a box should show up with green OK symbol inside
- Disconnect the phone, remove the battery, slot it back in then power the phone.
ENJOY. - SCATTER INFO:
- partition_index: SYS0 partition_name: PRELOADER file_name: preloader_s538.bin is_download: true type: SV5_BL_BIN linear_start_addr: 0x0 physical_start_addr: 0x0 partition_size: 0x1400000 region: EMMC_USER storage: HW_STORAGE_EMMC boundary_check: true is_reserved: false operation_type: BOOTLOADERS reserve: 0x00 - partition_index: SYS1 partition_name: MBR file_name: MBR is_download: true type: NORMAL_ROM linear_start_addr: 0x1400000 physical_start_addr: 0x1400000 partition_size: 0x80000 region: EMMC_USER storage: HW_STORAGE_EMMC boundary_check: true is_reserved: false operation_type: UPDATE reserve: 0x00 - partition_index: SYS2 partition_name: EBR1 file_name: EBR1 is_download: true type: NORMAL_ROM linear_start_addr: 0x1480000 physical_start_addr: 0x1480000 partition_size: 0x80000 region: EMMC_USER storage: HW_STORAGE_EMMC boundary_check: true is_reserved: false operation_type: UPDATE reserve: 0x00 - partition_index: SYS3 partition_name: PRO_INFO file_name: NONE is_download: false type: NORMAL_ROM linear_start_addr: 0x1500000 physical_start_addr: 0x1500000 partition_size: 0x300000 region: EMMC_USER storage: HW_STORAGE_EMMC boundary_check: true is_reserved: false operation_type: PROTECTED reserve: 0x00 - partition_index: SYS4 partition_name: NVRAM file_name: NONE is_download: false type: NORMAL_ROM linear_start_addr: 0x1800000 physical_start_addr: 0x1800000 partition_size: 0x500000 region: EMMC_USER storage: HW_STORAGE_EMMC boundary_check: true is_reserved: false operation_type: BINREGION reserve: 0x00 - partition_index: SYS5 partition_name: PROTECT_F file_name: NONE is_download: false type: NORMAL_ROM linear_start_addr: 0x1D00000 physical_start_addr: 0x1D00000 partition_size: 0xA00000 region: EMMC_USER storage: HW_STORAGE_EMMC boundary_check: true is_reserved: false operation_type: PROTECTED reserve: 0x00 - partition_index: SYS6 partition_name: PROTECT_S file_name: NONE is_download: false type: NORMAL_ROM linear_start_addr: 0x2700000 physical_start_addr: 0x2700000 partition_size: 0xA00000 region: EMMC_USER storage: HW_STORAGE_EMMC boundary_check: true is_reserved: false operation_type: PROTECTED reserve: 0x00 - partition_index: SYS7 partition_name: SECCFG file_name: NONE is_download: false type: NORMAL_ROM linear_start_addr: 0x3100000 physical_start_addr: 0x3100000 partition_size: 0x20000 region: EMMC_USER storage: HW_STORAGE_EMMC boundary_check: true is_reserved: false operation_type: INVISIBLE reserve: 0x00 - partition_index: SYS8 partition_name: UBOOT file_name: lk.bin is_download: true type: NORMAL_ROM linear_start_addr: 0x3120000 physical_start_addr: 0x3120000 partition_size: 0x60000 region: EMMC_USER storage: HW_STORAGE_EMMC boundary_check: true is_reserved: false operation_type: UPDATE reserve: 0x00 - partition_index: SYS9 partition_name: BOOTIMG file_name: boot.img is_download: true type: NORMAL_ROM linear_start_addr: 0x3180000 physical_start_addr: 0x3180000 partition_size: 0x600000 region: EMMC_USER storage: HW_STORAGE_EMMC boundary_check: true is_reserved: false operation_type: UPDATE reserve: 0x00 - partition_index: SYS10 partition_name: RECOVERY file_name: recovery.img is_download: true type: NORMAL_ROM linear_start_addr: 0x3780000 physical_start_addr: 0x3780000 partition_size: 0x600000 region: EMMC_USER storage: HW_STORAGE_EMMC boundary_check: true is_reserved: false operation_type: UPDATE reserve: 0x00 - partition_index: SYS11 partition_name: SEC_RO file_name: secro.img is_download: true type: NORMAL_ROM linear_start_addr: 0x3D80000 physical_start_addr: 0x3D80000 partition_size: 0x40000 region: EMMC_USER storage: HW_STORAGE_EMMC boundary_check: true is_reserved: false operation_type: UPDATE reserve: 0x00 - partition_index: SYS12 partition_name: MISC file_name: NONE is_download: false type: NORMAL_ROM linear_start_addr: 0x3DC0000 physical_start_addr: 0x3DC0000 partition_size: 0x80000 region: EMMC_USER storage: HW_STORAGE_EMMC boundary_check: true is_reserved: false operation_type: INVISIBLE reserve: 0x00 - partition_index: SYS13 partition_name: LOGO file_name: logo.bin is_download: true type: NORMAL_ROM linear_start_addr: 0x3E40000 physical_start_addr: 0x3E40000 partition_size: 0x300000 region: EMMC_USER storage: HW_STORAGE_EMMC boundary_check: true is_reserved: false operation_type: UPDATE reserve: 0x00 - partition_index: SYS14 partition_name: EXPDB file_name: NONE is_download: false type: NORMAL_ROM linear_start_addr: 0x4140000 physical_start_addr: 0x4140000 partition_size: 0xA00000 region: EMMC_USER storage: HW_STORAGE_EMMC boundary_check: true is_reserved: false operation_type: INVISIBLE reserve: 0x00 - partition_index: SYS15 partition_name: ANDROID file_name: system.img is_download: true type: EXT4_IMG linear_start_addr: 0x4B40000 physical_start_addr: 0x4B40000 partition_size: 0x38400000 region: EMMC_USER storage: HW_STORAGE_EMMC boundary_check: true is_reserved: false operation_type: UPDATE reserve: 0x00 - partition_index: SYS16 partition_name: CACHE file_name: cache.img is_download: true type: EXT4_IMG linear_start_addr: 0x3CF40000 physical_start_addr: 0x3CF40000 partition_size: 0x700000 region: EMMC_USER storage: HW_STORAGE_EMMC boundary_check: true is_reserved: false operation_type: UPDATE reserve: 0x00 - partition_index: SYS17 partition_name: USRDATA file_name: userdata.img is_download: true type: EXT4_IMG linear_start_addr: 0x3D640000 physical_start_addr: 0x3D640000 partition_size: 0xAA940000 region: EMMC_USER storage: HW_STORAGE_EMMC boundary_check: true is_reserved: false operation_type: UPDATE reserve: 0x00 - partition_index: SYS18 partition_name: BMTPOOL file_name: NONE is_download: false type: NORMAL_ROM linear_start_addr: 0xFFFF00A8 physical_start_addr: 0xFFFF00A8 partition_size: 0x1500000 region: EMMC_USER storage: HW_STORAGE_EMMC boundary_check: false is_reserved: true operation_type: RESERVED reserve: 0x00
-Dont touch any options, Keep the original setting (In case you want to format device before flash press choose format+download but it'snt recommanded because you will be ended with an EMEI null)
