How To Flash Samsung Chat 335 S3353 Tested Free Firmware (arabic)
Navigation

How To Flash Samsung Chat 335 S3353 Tested Free Firmware (arabic)

WHY YOU NEED TO FLASH YOUR PHONE!!
You need this firmware/stock rom if you have encountered this kind of problem in your Smartphone Listed Below:
  • Hang on logo.
  • Rebooting.
  • Bootloop & Dead boot after a wrong software.
  • System crashing.

How To Flash Samsung Chat 335 S3353 Tested Free Firmware (arabic)

How to know if the phone had a hard problem (Emmc problem)??
  • What is Emmc problem? also called read mode only,  it means that your internal memory doesnt accept command, so the phone stay on the same condition after a software or a hard reset.
  • If the phone hang on logo after flash, you ara facing Emmc problem.
  • As a precaution you shouldn't change setting in SP flashtool from Download only to format+download, you will end with a dead phone if you have a Emmc problem ofcourse.

Important:
  • An original Samsung mobile usb cable.
  • Phone must be fully charged
  • Install Samsung kies Air to install drivers
  • Backup your phone data using Kies Air

Download Area:
Samsung Chat 335 S3353 (S3353JPKF1) Arabic Firmware: From Here
Password: www.freemobilefirmware.com
Flash tool E2: From Here.
Samsung drivers (istall kies air): From Here.

Procedure to flash Samsung via E2 Flashtool:
Step 1: Install necessary driver from flashtool folder (for 86bits or 64bits)

Step 2: Now it's time to run the flash tool, double click on flashtool E2.exe and run with admin permission.

Step 3: Click on 3 dots (...) button

Step 4:  Select the flash files one by one
Note The selecting of firmware files must be in the below order
1-psi.fls 2-slb.fls 3-BSY.fls 4-CDS.fls 5-CSC.dffs.

Step 5: Don't change any setting, just keep them as default.
Step 6: Click on next button when you click on next button A new window will appear.



Step 7: Click on start Usb 1 button


Step 8: Now Connect your phone to pc using Usb cable.
download mode trick: remove battery, insert usb, then rapidly reinsret battery, phone will be detected by the flashtool.
Step 9: The flashing process will start automatically,it will take 3 to 5 minutes to complete, depend on phone you are flashing.

Step 10: When the flashing process is done,a success message will be shown.


Step 11: Disconnect your phone, remove the usb cable & battery, then reinstall battery & power phone on.
All Done.
                                      
Share