FIRMWARE ECHO FLOW Marshmallow 6.0
TESTED FIRMWARE
TESTED FIRMWARE
FREE DOWNLOAD
INFO:
- Model Name: sp9832a_2h11_4mvoltesea
- Model Brand: HN
- Model Device: sp9832a_2h11_volte
- AndrVersion: 6.0
- BaseBand CPU: SP9832A_2H11_VOLTE
- Project Ver: ECHO_FLOW_V15_20170830
- Model Ext: FLOW
PRE-REQUISITE
- This is for Echo Flow only.
- Your device must have 70% Of battery.
- You need a Laptop or PC to perform this Action.
- Download the right firmware for Echo Flow from the link bellow.
- Make sure you have followed the steps properly. Don’t Skip and Read!
- We are not responsible for any damage that you make to your Phone.*
WHY YOU NEED TO FLASH YOUR PHONE!!
You need this firmware/stock rom if you have encountered this kind of problem in your Smartphone Listed Below:
1.Hang on logo.
2.Rebooting.
3.Bootloop & Dead boot after a wrong software.
4-Virus & Sexual Apps.
5-System crashing
2.Rebooting.
3.Bootloop & Dead boot after a wrong software.
4-Virus & Sexual Apps.
5-System crashing
How to know if the phone had a hard problem (Emmc problem)??
- What is Emmc problem? also called read mode only, it means that your internal memory doesnt accept command, so the phone stay on the same condition after a software or a hard reset.
- if the phone hang on logo after flash, you ara facing Emmc problem.
- As a precaution you shouldn't change setting in SP flashtool from Download only to format+download, you will end with a dead phone if you have a Emmc problem ofcourse.
DOWNLOAD AREA:
Firmware Download Link: FROM HERE
Password For Firmware: www.freemobilefirmware.comHOW TO FLASH:*
Use CM2SPD