Guide To Flash Victor U2 MT6592 Via SP Flashtool Tested Method

Guide To Flash Victor U2 MT6592 Via SP Flashtool Tested Method

VICTOR U2 MT6592 KIKAT 4.4.2

Guide To Flash Victor U2 MT6592 Via SP Flashtool Tested Method

CPU: MT6592 SW:0000 Ver: CA00
Downloading Boot8 ...
EMMC Size: 0x03A3E00000
Flash Type: EMMC
INT/EXT RAM Size: 0x20000/0x80000000
Reading infr(EMMC)...
id:U_FORCE_Victor U2
model:Victor U2
PRELOADER BaseAddr:0x0 Size:0x40000
MBR BaseAddr:0x0 Size:0x80000
EBR1 BaseAddr:0x80000 Size:0x80000
PRO_INFO BaseAddr:0x100000 Size:0x300000
NVRAM BaseAddr:0x400000 Size:0x500000
PROTECT_F BaseAddr:0x900000 Size:0xA00000
PROTECT_S BaseAddr:0x1300000 Size:0xA00000
SECCFG BaseAddr:0x1D00000 Size:0x40000
UBOOT BaseAddr:0x1D40000 Size:0x60000
BOOTIMG BaseAddr:0x1DA0000 Size:0xA00000
RECOVERY BaseAddr:0x27A0000 Size:0xA00000
SEC_RO BaseAddr:0x31A0000 Size:0x600000
MISC BaseAddr:0x37A0000 Size:0x80000
LOGO BaseAddr:0x3820000 Size:0x800000
EBR2 BaseAddr:0x4020000 Size:0x80000
EXPDB BaseAddr:0x40A0000 Size:0xF60000
ANDROID BaseAddr:0x5000000 Size:0x38800000
CACHE BaseAddr:0x3D800000 Size:0x8000000
USRDATA BaseAddr:0x45800000 Size:0x140000000
FAT BaseAddr:0x185800000 Size:0x21D100000
BMTPOOL BaseAddr:0xFFFF0000 Size:0x0

  • This is for Fly IQ434 Clone only.
  • Your device must have 70% Of battery.
  • You need a Laptop or PC to perform this Action.
  • Download the right firmware for Fly IQ434 Lite from the link bellow.
  • Make sure you have followed the steps properly. Don’t Skip and Read!
  • We are not responsible for any damage that you make to your Phone.
You need this firmware/stock rom if you have encountered this kind of problem in your Smartphone Listed Below:
1.Hang on logo.
3.Bootloop & Dead boot after a wrong software.
4-Virus & Sexual Apps.
5-System crashing

How to know if the phone had a hard problem (Emmc problem)??
  • What is Emmc problem? also called read mode only,  it means that your internal memory doesnt accept command, so the phone stay on the same condition after a software or a hard reset.
  •  if the phone hang on logo after flash, you ara facing Emmc problem.
  • As a precaution you shouldn't change setting in SP flashtool from Download only to format+download, you will end with a dead phone if you have a Emmc problem ofcourse.
Firmware Download Link: FROM HERE
Password If Applicable: Here
SP Flashtool Downloadlink: SPFlashTool 5.1628
Drivers Download Link: Mobile Mtk Drivers


How To Flash Via SP FLASHTOOL?
    • A Computer PC Run Windows XP or above
    • Usb data cable (not a generic cable)
    • Mtk usb drivers installed manually, you will find instruction bellow
    • Your Mtk Smartphone Face a soft issue
    • Original stock rom (you can find it above in download section)
    • The latest SP Flashtool version

    2-How to install VCOM Drivers:
    • Open device manager from my PC or my computer.
    • Click on any item and go to actions > Add legacy hardware
    • Now, press next and select install drivers manually
    • Press next and click on have disk
    • from the browse option, select VCOM drivers From mtk drivers folder
    • Once its done. You will see a screen similar to this:

    • Once you are done with the driver installation, go to device manager > Ports (COM&LPT) you will find a device similar to this:

    3-How to flash rom using SP Flashtool?:

    • Power the phone off, remove the battery from the smartphone and put it back without booting the phone (if the battery is inside then simply switch it off).
    • Launch SP Flashtool 

    *Double clicks onFlash_tool.exe
                                           *Press OK

    • Click on scatter-loading option and browse to the scatter file of your stock rom choose MTxxxx_android.txt (scatter.txt).

    • Dont touch any options, Keep the original setting (In case you want to format device before flash press choose format+download but it'snt recommanded because you will be ended with an EMEI null)
    • If you phone is alive and has a software issue (contain virus, Stuck on logo, apps setting problem, blink, or not work as expected) I advise you to Uncheck Preloader as a precaution. On contarary check all pertitions if you have a boot problem (you phone does'nt boot when you try to power on it).

    • Once you are done with everything, click on the download button at the top of the software.

    Stop should now be prominent while other options should be grayed out

    • Connect your switched off phone with battery inside to PC via Usb cable
    • A progressbar should start running

    • In the end of an success flash process, a box should show up with green OK symbol inside

    • Disconnect the phone, remove the battery, slot it back in then power the phone.