Guide To Flash Danew Konnect 605 Mt6735 Marshmallow 6.0 Via Sp Flashtool Tested Firmware

GUIDE TO FLASH DANEW KONNECT 605 MT6735

MARSHMALLOW 6.0
FREE FIRMWARE DOWNLOAD

INFO:

CPU: MT6735 SW:0000 Ver: CA00
Downloading Boot8 ...
EMMC Size: 0x03A3E00000
Flash Type: EMMC
INT/EXT RAM Size: 0x20000/0x60000000
Reading infr(EMMC)...
WIFI MAC:C8AE9C36FCD9
BT_ADDR:52FF460335B8
id:HM2A.601.DANEW.HB.H.SUSVDU.1011.V2.08
version:6.0
model:Konnect605
brand:Danew
manufacturer:Danew
PROINFO BaseAddr:0x80000 Size:0x300000
NVRAM BaseAddr:0x380000 Size:0x500000
PROTECT1 BaseAddr:0x880000 Size:0xA00000
PROTECT2 BaseAddr:0x1280000 Size:0xA00000
LK BaseAddr:0x1C80000 Size:0x80000
PARA BaseAddr:0x1D00000 Size:0x80000
BOOT BaseAddr:0x1D80000 Size:0x1000000
RECOVERY BaseAddr:0x2D80000 Size:0x1000000
LOGO BaseAddr:0x3D80000 Size:0x800000
EXPDB BaseAddr:0x4580000 Size:0xA00000
SECCFG BaseAddr:0x4F80000 Size:0x80000
OEMKEYSTORE BaseAddr:0x5000000 Size:0x200000
SECRO BaseAddr:0x5200000 Size:0x600000
KEYSTORE BaseAddr:0x5800000 Size:0x800000
TEE1 BaseAddr:0x6000000 Size:0x500000
TEE2 BaseAddr:0x6500000 Size:0x500000
FRP BaseAddr:0x6A00000 Size:0x100000
NVDATA BaseAddr:0x6B00000 Size:0x2000000
METADATA BaseAddr:0x8B00000 Size:0x2500000
SYSTEM BaseAddr:0xB000000 Size:0xE1000000
CACHE BaseAddr:0xEC000000 Size:0x19000000
USERDATA BaseAddr:0x105000000 Size:0x29DD80000
FLASHINFO BaseAddr:0x3A2D80000 Size:0x1000000

PRE-REQUISITE

This is for Hotwav Konnect 605 only.
Your device must have 70% Of battery.
You need a Laptop or PC to perform this Action.
Download the right firmware for Konnect 605 from the link bellow.
Back Up your Data to make sure you have data’s in case if something Wrong (This Process won’t loose your data)
Make sure you have followed the steps properly. Don’t Skip and Read!
We are not responsible for any damage that you make to your Phone.

WHY YOU NEED TO FLASH YOUR PHONE!!
You need this firmware/stock rom if you have encountered this kind of problem in your Smartphone Listed Below:

1.Hang on logo.
2.Rebooting.
3.Bootloop & Dead boot after a wrong software.
4-Virus & Sexual Apps.
5-System crashing
6-Frp remove

How to know if the phone had a hard problem (Emmc problem)??

What is Emmc problem? also called read mode only, it means that your internal memory doesnt accept command, so the phone stay on the same condition after a software or a hard reset.
if the phone hang on logo after flash, you ara facing Emmc problem.
As a precaution you shouldn't change setting in SP flashtool from Download only to format+download, you will end with a dead phone if you have a Emmc problem ofcourse.

DOWNLOAD AREA:

Firmware Download Link: FROM HERE
Password For Firmware: www.freemobilefirmware.com
SP Flashtool Downloadlink: SPFlashTool 5.1712
Drivers Download Link: Mobile Mtk Drivers

How To Flash Via SP FLASHTOOL?

1-Requirements:

- A Computer PC Run Windows XP or above
- Usb data cable (not a generic cable)
- Mtk usb drivers installed manually, you will find instruction bellow
- Your Mtk Smartphone Face a soft issue
- Original stock rom (you can find it above in download section)
- The latest SP Flashtool version
2-How to install VCOM Drivers:
- Open device manager from my PC or my computer.
- Click on any item and go to actions > Add legacy hardware
- Now, press next and select install drivers manually
- Press next and click on have disk
- from the browse option, select VCOM drivers From mtk drivers folder
- Once its done. You will see a screen similar to this:
- Once you are done with the driver installation, go to device manager > Ports (COM&LPT) you will find a device similar to this:
3-How to flash rom using SP Flashtool?:
- Power the phone off, remove the battery from the smartphone and put it back without booting the phone (if the battery is inside then simply switch it off).
- Launch SP Flashtool
*Double clicks onFlash_tool.exe

*Press OK
- Click on scatter-loading option and browse to the scatter file of your stock rom choose MTxxxx_android.txt (scatter.txt).
- Dont touch any options, Keep the original setting (In case you want to format device before flash press choose format+download but it'snt recommanded because you will be ended with an EMEI null)
- If you phone is alive and has a software issue (contain virus, Stuck on logo, apps setting problem, blink, or not work as expected) I advise you to Uncheck Preloader as a precaution. On contarary check all pertitions if you have a boot problem (you phone does'nt boot when you try to power on it).
- Once you are done with everything, click on the download button at the top of the software.
Stop should now be prominent while other options should be grayed out
- Connect your switched off phone with battery inside to PC via Usb cable
- A progressbar should start running
- In the end of an success flash process, a box should show up with green OK symbol inside
- Disconnect the phone, remove the battery, slot it back in then power the phone.