GUIDE TO FLASH STARLIGHT UMI LONDON MARSHMALLOW 6.0 FREE FIRMWARE DOWNLOAD
PRE-REQUISITE
This is for Starlight Umi London only.
*Your device must have 70% Of battery.
*You need a Laptop or PC to perform this Action.
*Download the right firmware for Starlight from the link bellow.
*Back Up your Data to make sure you have data’s in case if something Wrong
(This Process won’t loose your data)
(This Process won’t loose your data)
*Make sure you have followed the steps properly. Don’t Skip and Read!
* We are not responsible for any damage that you make to your Phone.
WHY YOU NEED TO FLASH YOUR PHONE!!
You need this firmware/stock rom if you have encountered this kind of problem in your Smartphone Listed Below:
1.Hang in logo
2.Rebooting
3.Bootloop
4-Virus Apps
Remarque: Firmaware file doesnt contain boot file
All needed partitions are there except boot file to avoid dead phone if you have a hard problem.
How to know if the phone had a hard problem (Emmc problem)??
if the phone hang on logo after flash.
with the firmware file given you will avoid deadboot
All needed partitions are there except boot file to avoid dead phone if you have a hard problem.
How to know if the phone had a hard problem (Emmc problem)??
if the phone hang on logo after flash.
with the firmware file given you will avoid deadboot
INFO:
Device Brand : STARLIGHT
Device Model : Starlight_London
Device CPU : MT6580
Device IntName : Starlight_London
Device Version : 6.0
Device Compile : 18/02/2017 06:29:17
Device Project : alps-mp-m0.mp1-V2.34_vz6580.we.i.m_P64
Device ExtInfo : Starlight_London
DOWLOAD STARLIGHT UMI LONDON FIRMWARE:
Download all parts then unzip them as one file
password: www.freemobilefirmware.com
don't copy paste without permisson
For UMI LONDON (NOT STARLIGHT) Firmware link:
FLASH COMPOSENT:
-Preloader
-Userdata
-Cache data
-System data
*This Firmware partitions is all you need to repair the phone software problems
DOWNLOAD FLAASH TOOL:
SP Flashtool Downloadlink: SP_Flash_Tool_v5.1516
Drivers Download Link: Mobile Mtk Drivers
🔻🔻🔻
How To Flash Via SP FLASHTOOL?
1-Requirements:
- A Computer PC Run Windows XP or above
- Usb data cable (not a generic cable)
- Mtk usb drivers installed manually, you will find instruction bellow
- Your Mtk Smartphone Face a soft issue
- Original stock rom (you can find it above in download section)
- The latest SP Flashtool version
2-How to install VCOM Drivers:- Open device manager from my PC or my computer.
- Click on any item and go to actions > Add legacy hardware
- Now, press next and select install drivers manually
- Press next and click on have disk
- from the browse option, select VCOM drivers From mtk drivers folder
- Once its done. You will see a screen similar to this:
- Once you are done with the driver installation, go to device manager > Ports (COM&LPT) you will find a device similar to this:
3-How to flash rom using SP Flashtool?:- Power the phone off, remove the battery from the smartphone and put it back without booting the phone (if the battery is inside then simply switch it off).
- Launch SP Flashtool
*Double clicks onFlash_tool.exe*Press OK- Click on scatter-loading option and browse to the scatter file of your stock rom choose MTxxxx_android.txt (scatter.txt).
- Dont touch any options, Keep the original setting (In case you want to format device before flash press choose format+download but it'snt recommanded because you will be ended with an EMEI null)
- If you phone is alive and has a software issue (contain virus, Stuck on logo, apps setting problem, blink, or not work as expected) I advise you to Uncheck Preloader as a precaution. On contarary check all pertitions if you have a boot problem (you phone does'nt boot when you try to power on it).
- Once you are done with everything, click on the download button at the top of the software.
Stop should now be prominent while other options should be grayed out- Connect your switched off phone with battery inside to PC via Usb cable
- A progressbar should start running
- In the end of an success flash process, a box should show up with green OK symbol inside
- Disconnect the phone, remove the battery, slot it back in then power the phone.
ENJOY.