Guide to flash Samsung Note 4 Sprint SM-N910P Marshmallow 6.0.1 rooted, multi languages firmware and English firmware
Navigation

Guide to flash Samsung Note 4 Sprint SM-N910P Marshmallow 6.0.1 rooted, multi languages firmware and English firmware

    You are facing problem with your Note 4 Sprint version, you need root or convert it to multi languages version!!. You are in the right place, this article will guide you to how update your Note 4 SM-N910P To the latest English version based on marshmallow 6.0.1, Root and change to multi languages in same time by flashing a Stock rom pre-rooted and has an installed languges package.

     Or if you are a Note 4 Sprint running android lollipop 5.1.1, you need to get root access or install a multi languages version and you would not upgrade to android 6.0.1. we have a stock firmware pre-rooted and with multi-languages pre-installed for you.

     For the above operation you need just Odin flash, Pre-rooted (multi languages) Stock rom, drivers, a,d your Note 4 Sprint phone ofcourse!!!. fellow instructions, don't miss a line.


flash samsung note 4 Sprint n910p marshmallow 6.0.1 root


Important Things To Do Before Flashing Stock ROM
Before you can proceed to the process make sure that you do the things we will list below and that you read it carefully, this procedure works perfectly and tested by many users, so if you have doubt or questions about this post you can leave a comment below.
  • Prepare your USB Chord, PC, STOCK ROM or Firmware Files (Must Download Below). 
  • Make Sure you Perform Data Backup because flashing Stock ROM will remove the installed apps and stored photos or Music. 
  • Also doing this process is crucial so we admit you have a presence of mind, common sense, and read our disclaimer below, as well as make sure you have at least 60% to 80%.
Downloads:

Note 4 SM-N910P Sprint 5.1.1 (root+multi languages) firmware: From here
Note 4 SM-N910P Sprint 6.0.1 (root+multi languages) firmware: From here
Note 4 SM-N910P Sprint 5.1.1 English firmware for native: From here
Note 4 SM-N910P Sprint 6.0.1 Engilsh firmware for native: From here
Odin PC software — Download latest Odin software from here: Odin3 v3.12.3
Samsung drivers (download smart switch in order to get the latest drivers): Smart Switch

FELLOW VIDEO INSTRUCTION ON YOUTUBE CHANEL:
🔻🔻🔻🔻



OR JUST FELLOW STEPS GIVEN BELLOW:


How To Install Stock Rom 6.0.1/5.1.1 Or Pre-rootes+multi languages Firmware:

Step 1: Download the Odin software and firmware file from above.

Step 2: Install drivers by installing Samsung Smart Switch Link given in download area above.

Step 3: Extract the downloaded firmware file (in .zip format) now. You can use Winrar for this, then right click on firmware file and under winrar menu, select ‘Extract here’. You should get the a file in .tar.md5 format now. We will be loading this file into Odin, to be installed on device (in step 9 below)

Step 4: Extract the Odin file. You should get this file, Odin3 v3.12.3).

Step 5: Disconnect your Galaxy Note 4 from PC if it is connected.

Step 6: Boot Download Mode manually:

  • Power off your smartphone completely by holding Power button.
  • Next, press and hold Volume Down, Home and Power buttons at the same time.
  • Release the buttons when the Warning alert screen is displayed on your phone.
  • Now, press Volume Up to load Galaxy Note 4 Download Mode.
  •  if you’ve changed your mind and you don’t want to boot Download Mode press Volume Down and your device will reboot in normal mode.



After you’re done using Download Mode and updating your phone you will see the device restarting. If you’ve changed your mind and you don’t want to use Download Mode anymore, then you can press the Power button for ten seconds in order to exit Download Mode. Every time your device gets stuck while you’re using it, you simply need to press and hold Power for 10 seconds and the Note 4 will reboot in normal mode.

Step 7: Double click on extracted file of Odin, Odin3 v3.12.3.exe, to open the Odin window.

Step 8: Connect your Sprint Galaxy Note 4 now using USB cable. Odin should recognize your device. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in bottom left, and the first box under ID:COM will also be colored. and turn its background blue. If not, simply restart the Odin software and the device will be detected.




Step 9: Load the firmware file into Odin. Click the AP button on Odin and the select the .tar.md5 file from Step 3 above.



You need to know: simply wait until that’s done and the firmware file is loaded. Don’t worry if Odin gets unresponsive for a while, it’s normal. Binary size will also show up in Odin.



Step 10: Make sure Re-partition check box is NOT selected, under the Options tab. Don’t use PIT tab either. Go back to Log tab btw, it will show the progress when you hit start button in next step. Or simply don't change anysitting.

Step 11: Click the Start button on Odin now to start flashing the firmware on your Galaxy Note 4.Wait till installation is finished, after which your device will reboot automatically. You’ll get PASS message as shown below upon successful installation from Odin.



Remarque: If you get FAIL in the top left box installing multi languages firmware on Note 4 Marshmallow 6.0.1, you need to try flashing again, using the latest English firmware in downloads above. why I tell you that? Because maybe samsung will give a new security patch for that phone different from the security of given rom.

Step 12: First start of the device may take time, so wait patiently.







     That’s it. Enjoy your Sprint Galaxy Note 4 rooted with lots of languages inside. What you have to do? choose your desired language and start having fun.

                                      
Share