Guide To Flash Doogee Kissme DG580 Black Screen Fix android 4.4.2 Tested Firmware

GUIDE TO FLASH DOOGEE KISSME DG580 KITKATFIX BLACK SCREEN ERROR FREE FIRMWARE DOWNLOAD

RE-REQUISITE

• This is for Mtk Smartphone only.
• Your device must have 70% Of battery.
• You need a Laptop or PC to perform this Action.
• Download the right firmware for your Mtk Smartphone from the link bellow.
• Make sure you have followed the steps properly. Don’t Skip and Read!
• We are not responsible for any damage that you make to your Phone.

WHY YOU NEED TO FLASH YOUR PHONE!!

You need this firmware/stock rom if you have encountered this kind of problem in your phone Listed Below:

1.Hang in logo

2.Rebooting

3.Bootloop

4.Dead Phone But detected in PC

5-Black Screen after a wrong Flash

How to know if the phone had a hard problem (Emmc problem)??

• What is Emmc problem? also called read mode only,  it means that your internal memory doesnt accept command, so the phone stay on the same condition after a software or a hard reset.
•  if the phone hang on logo after flash, you ara facing Emmc problem.
• As a precaution you shouldn't change setting in SP flashtool from Download only to format+download, you will end with a dead phone if you have a Emmc problem ofcourse.

INFO:

Brand     : DOOGEE

ProdName  : J608_PUBLIC

ProdModel : KISSME-DG580

Device    : J608_PUBLIC

AndroidVer: 4.4.2

MTKxCPU   : MT6582

MTKxPRJ   : ALPS.KK1.MP1.V2.10

[Read Ok] : preloader_sm619b_dg_a27_aejly_82.bin

[Read Ok] : MBR

[Read Ok] : EBR1

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : EBR2

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img
[ScatCFG] : MT6582 / V1.1.1 / sm619b_dg_a27_aejly_82 / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 949 MiB

DOWNLOAD AREA:

FIRMWARE DOWNLOAD LINK: FROM HERE

password: www.freemobilefirmware.com

FLASHTOOL DOWNLOAD LINK: MTK FLASHTOOL V5.1516

Drivers Download Link: Mobile Mtk Drivers

1. FELLOW VIDEO INSTRUCTION:
2. Same instruction for doogee x5 max
3. 🔻🔻🔻🔻🔻

How To Flash Via SP FLASHTOOL?

1-Requirements:

1. • A Computer PC Run Windows XP or above
   • Usb data cable (not a generic cable)
   • Mtk usb drivers installed manually, you will find instruction bellow
   • Your Mtk Smartphone Face a soft issue
   • Original stock rom (you can find it above in download section)
   • The latest SP Flashtool version
   
   
   2-How to install VCOM Drivers:
   • Open device manager from my PC or my computer.
   • Click on any item and go to actions > Add legacy hardware
   • Now, press next and select install drivers manually
   • Press next and click on have disk
   • from the browse option, select VCOM drivers From mtk drivers folder
   • Once its done. You will see a screen similar to this:
   
   
   
   
   
   
   
   
   
   • Once you are done with the driver installation, go to device manager > Ports (COM&LPT) you will find a device similar to this:
   
   
   
   
   
   
   
   3-How to flash rom using SP Flashtool?:
   
   
   • Power the phone off, remove the battery from the smartphone and put it back without booting the phone (if the battery is inside then simply switch it off).
   • Launch SP Flashtool 
   
   
   
   *Double clicks onFlash_tool.exe
   
                                          *Press OK
   
   
   
   
   
   
   
   
   
   
   
   
   
   • Click on scatter-loading option and browse to the scatter file of your stock rom choose MTxxxx_android.txt (scatter.txt).
   
   
   
   
   
   
   
   
   
   
   • Dont touch any options, Keep the original setting (In case you want to format device before flash press choose format+download but it'snt recommanded because you will be ended with an EMEI null)
   • If you phone is alive and has a software issue (contain virus, Stuck on logo, apps setting problem, blink, or not work as expected) I advise you to Uncheck Preloader as a precaution. On contarary check all pertitions if you have a boot problem (you phone does'nt boot when you try to power on it).
                                  
   
   
   
   • Once you are done with everything, click on the download button at the top of the software.
   
   
   
   
   
   
   
   Stop should now be prominent while other options should be grayed out
   
   
   
   
   • Connect your switched off phone with battery inside to PC via Usb cable
   • A progressbar should start running
   
   
   
   
   
   • In the end of an success flash process, a box should show up with green OK symbol inside
   
   
   
   
   
   • Disconnect the phone, remove the battery, slot it back in then power the phone.

ENJOY.