GUIDE TO FLASH GEANT G4 MT6572 TESTED FIRMWARE FREE DOWNLAD VIA SP FLASHTOOL
INFO:
Device Brand : GEANT
Device Model : GEANT_G4
Device CPU : MT6572
Device IntName : GEANT_G4
Device Version : 4.4.2
Device Compile : 09/08/2016 13:36:32
Device Project : ALPS.KK1.MP7.V1
Device ExtInfo : GEANT G4
PRE-REQUISITE
This is for Geant G4 only.
*Your device must have 70% Of battery.
*You need a Laptop or PC to perform this Action.
*Download the right firmware for Starlight from the link bellow.
*Back Up your Data to make sure you have data’s in case if something Wrong (This Process won’t loose your data)
*Make sure you have followed the steps properly. Don’t Skip and Read!
* We are not responsible for any damage that you make to your Phone.
WHY YOU NEED TO FLASH YOUR PHONE!!
You need this firmware/stock rom if you have encountered this kind of problem in your Smartphone Listed Below:
1.Hang on logo
2.Rebooting
3.Bootloop
3.Bootloop
4-Virus Apps
Remarque: Firmaware file doesnt contain boot file
Remarque: Firmaware file doesnt contain boot file
All needed partitions are there except boot file to avoid dead phone if you have a hard problem.
How to know if the phone had a hard problem (Emmc problem)??
How to know if the phone had a hard problem (Emmc problem)??
if the phone hang on logo after flash.
with the firmware file given you will avoid deadboot.
Firmware download link:
Password: datta-sat.com
FELLOW VIDEO TUTORIAL
⧭⧭⧭⧭⧭
How To Flash Via SP FLASHTOOL?
1-Requirements:
- A Computer PC Run Windows XP or above
- Usb data cable (not a generic cable)
- Mtk usb drivers installed manually, you will find instruction bellow
- Your Mtk Smartphone Face a soft issue
- Original stock rom (you can find it above in download section)
- The latest SP Flashtool version
2-How to install VCOM Drivers:- Open device manager from my PC or my computer.
- Click on any item and go to actions > Add legacy hardware
- Now, press next and select install drivers manually
- Press next and click on have disk
- from the browse option, select VCOM drivers From mtk drivers folder
- Once its done. You will see a screen similar to this:
- Once you are done with the driver installation, go to device manager > Ports (COM&LPT) you will find a device similar to this:
3-How to flash rom using SP Flashtool?:- Power the phone off, remove the battery from the smartphone and put it back without booting the phone (if the battery is inside then simply switch it off).
- Launch SP Flashtool
*Double clicks onFlash_tool.exe
*Press OK
- Click on scatter-loading option and browse to the scatter file of your stock rom choose MTxxxx_android.txt (scatter.txt).
- Dont touch any options, Keep the original setting (In case you want to format device before flash press choose format+download but it'snt recommanded because you will be ended with an EMEI null)
- If you phone is alive and has a software issue (contain virus, Stuck on logo, apps setting problem, blink, or not work as expected) I advise you to Uncheck Preloader as a precaution. On contarary check all pertitions if you have a boot problem (you phone does'nt boot when you try to power on it).
- Once you are done with everything, click on the download button at the top of the software.
Stop should now be prominent while other options should be grayed out- Connect your switched off phone with battery inside to PC via Usb cable
- A progressbar should start running
- In the end of an success flash process, a box should show up with green OK symbol inside
- Disconnect the phone, remove the battery, slot it back in then power the phone.
ENJOY.
