Flash Samsung Galaxy S4 LTE LTE-A GT-i9505 i9506 Lollipop 5.0.1 Tested Firmware
Navigation

Flash Samsung Galaxy S4 LTE LTE-A GT-i9505 i9506 Lollipop 5.0.1 Tested Firmware

Guide To Flash Samsung Galaxy S4 LTE GT-i9505 i9506 Lollipop 5.0.1 Tested Firmware

Flash Samsung Galaxy S4 LTE LTE-A GT-i9505 i9506 Lollipop 5.0.1 Tested Firmware

Mobile : Galaxy S4 LTE
Model : GT-I9505
System Version : Lollipop 5.0.1
Baseband : KSA I9505XXUHOJ2  

download link:
LOLLIPOP 5.0.1 FROM HERE
KITKAT 4.4.2  FROM HERE
DRIVERS: Download Kies Air HERE
download odin flasher:

 Mobile : Galaxy S4 LTE-A
Model : GT-I9506
System Version : Lollipop 5.0.1
Baseband : NEE I9506XXUDOF2

download link:
LOLLIPOP 5.0.1 FROM HERE
KITKAT 4.4.2  FROM HERE
DRIVERS: Download Kies Air HERE
download odin flasher:

FELLOW VIDEO INSTRUCTIONS:
🔻🔻🔻


How to update Galaxy S4 LTE LTE-A GT-i9505 i9506 to Android 5.0.1 LOLLIPOP:

Step 1: Download the Odin software and Android 5.0.1 firmware, from the downloads section above.

Step 2: Extract Android 5.0.1 firmware file.

Step 3: Extract Odin file.
Step 4: Switch off your Galaxy S4 LIE from PC, boot it into download mode. To achieve this, wait for six to seven seconds after screen goes off, and long press Volume Down + Power + Home buttons until warning screen is displayed. Then press, Volume Up to proceed to download mode.

Step 5: Interface your phone to PC using USB cable. In Odin you should see an "Added" message appearing in the Log box at the bottom left, and the first box under ID:COM will also change its background colour to Blue.

Step 6: Load firmware into Odin. To achieve this, Click on the AP button on Odin and the select the .tar.md5 extracted file as explained in Step 3.

Step 7: Within Odin, check to ensure that Re-partition checkbox is deselected,
Step 8: Within Odin, select Start Button to start flashing the firmware on your tablet.

Step 9: After completion of installation, your Galaxy S4 LTE will reboot automatically. You'll get a "Pass" message upon successful installation from Odin.

Step 10: Disconnect your tablet from the computer. Navigate to Settings > About Device to verify installation of new firmware.
                                      
Share