GUIDE TO FLASH CONDOR GRIFFE G4S PHQ519 ANDROID 4.4.2 SPD FLASHTOOL TESTED FIRMWARE
Navigation

GUIDE TO FLASH CONDOR GRIFFE G4S PHQ519 ANDROID 4.4.2 SPD FLASHTOOL TESTED FIRMWARE

GUIDE TO CONDOR G4S PHQ519 ANDROID 4.4.2 SPD FLASHTOOL FACTORY FIRMWARE
VIA SPD FLASHTOOL
GUIDE TO FLASH CONDOR GRIFFE G4S PHQ519 ANDROID 4.4.2 SPD FLASHTOOL TESTED FIRMWARE

info:
Model Name  : PHQ519
Model Brand : CONDOR
Model Device: PHQ519
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : PHQ519_125A_V0_0_5
Model Ext   : PHQ519

PRE-REQUISITE
  • This is for Condor G4S only.
  • Your device must have 70% Of battery.
  • You need a Laptop or PC to perform this Action.
  • Download the right firmware for Condor G4S  from the link bellow.
  • Make sure you have followed the steps properly. Don’t Skip and Read!
  • We are not responsible for any damage that you make to your Phone.


WHY YOU NEED TO FLASH YOUR PHONE!!
You need this firmware/stock rom if you have encountered this kind of problem in your Smartphone Listed Below:
1.Hang on logo.
2.Rebooting.
3.Bootloop & Dead boot after a wrong software.
4-Virus & Sexual Apps.
5-System crashing




How to know if the phone had a hard problem (Emmc problem)??
  • What is Emmc problem? also called read mode only,  it means that your internal memory doesnt accept command, so the phone stay on the same condition after a software or a hard reset.
  •  if the phone hang on logo after flash, you ara facing Emmc problem.
  • As a precaution you shouldn't change setting in SP flashtool from Download only to format+download, you will end with a dead phone if you have a Emmc problem ofcourse.
REMARQUE:
MAKE BACKUP BEFORE FLASH



DOWNLOAD AREA:

FIRMWARE DOWNLOAD LINK:
FLASHTOOL LATEST:  SPD FLASHTOOL   
DRIVERS DOWNLOAD LINK: FROM HERE
How To Install Spd Drivers manually: FROM HERE

FELLOW VIDEO INSTRUCTION:
⧭⧭⧭⧭


GUIDE TO FLASH WITH RESEARCH DOWNLOADER
1- Open the Research download tool
2. Launch ResearchDownload.exe


3- Click on the Load Packet icon (top left corner)
4- A window will pops up, navigate to the location of the .pac file, select it then click Open

5- The pac file should now be loaded (its name should appear at the top)


6- Click the Settings Icon (top left corner)

7- In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files

8- Click the Start downloading button

9-You should see Waiting.... under the Progress bar

10. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume down and volume up buttons  while connecting to PC on some phones) and flashing should begin. DO NOT interrupt

11- Once flashing is complete, you'll see Passed

12- Click on the Stop downloading icon then disconnect the phone from PC and boot

                                      
Share