GUIDE TO FLASH HTC M8W CLONE MT6582 TESTED FIRMWARE FREE DOWNLOAD
INFO:
Device Brand : HTC_M8w
Device Model : HTC_M8w
Device CPU : MT6582
Device IntName : HTC_M8w
Device Version : 4.4.2
Device Project : ALPS.KK1.MP1.V2.10
Device ExtInfo : HTC_M8w
Device Storage : EMMC
PRELOADER:>>addr:0x000000 --length:0xC00000
MBR:>>addr:0xC00000 --length:0x080000
EBR1:>>addr:0xC80000 --length:0x080000
PRO_INFO:>>addr:0xD00000 --length:0x300000
NVRAM:>>addr:0x1000000 --length:0x500000
PROTECT_F:>>addr:0x1500000 --length:0xA00000
PROTECT_S:>>addr:0x1F00000 --length:0xA00000
SECCFG:>>addr:0x2900000 --length:0x020000
UBOOT:>>addr:0x2920000 --length:0x060000
BOOTIMG:>>addr:0x2980000 --length:0x1000000
RECOVERY:>>addr:0x3980000 --length:0x1000000
SEC_RO:>>addr:0x4980000 --length:0x600000
MISC:>>addr:0x4F80000 --length:0x080000
LOGO:>>addr:0x5000000 --length:0x300000
EXPDB:>>addr:0x5300000 --length:0xA00000
ANDROID:>>addr:0x5D00000 --length:0x38400000
CACHE:>>addr:0x3E100000 --length:0x7E00000
USRDATA:>>addr:0x45F00000 --length:0x8CD00000
BMTPOOL:>>addr:0xFFFF0000 --length:0x000000
PRE-REQUISITE
- This is for M8W Clone only.
- Your device must have 70% Of battery.
- You need a Laptop or PC to perform this Action.
- Download the right firmware for M8w Clone from the link bellow.
- Back Up your Data to make sure you have data’s in case if something Wrong (This Process won’t loose your data)
- Make sure you have followed the steps properly. Don’t Skip and Read!
- We are not responsible for any damage that you make to your Phone.
WHY YOU NEED TO FLASH YOUR PHONE!!
You need this firmware/stock rom if you have encountered this kind of problem in your Smartphone Listed Below:
1.Hang on logo.
2.Rebooting.
3.Bootloop & Dead boot after a wrong software.
4-Virus & Sexual Apps.
5-System crashing
6-Frp remove
2.Rebooting.
3.Bootloop & Dead boot after a wrong software.
4-Virus & Sexual Apps.
5-System crashing
6-Frp remove
How to know if the phone had a hard problem (Emmc problem)??
- What is Emmc problem? also called read mode only, it means that your internal memory doesnt accept command, so the phone stay on the same condition after a software or a hard reset.
- if the phone hang on logo after flash, you ara facing Emmc problem.
- As a precaution you shouldn't change setting in SP flashtool from Download only to format+download, you will end with a dead phone if you have a Emmc problem ofcourse.
DOWNLOAD AREA:
FIRMWARE DOWNLOAD LINK:
How To Flash Via SP FLASHTOOL?
1-Requirements:
- A Computer PC Run Windows XP or above
- Usb data cable (not a generic cable)
- Mtk usb drivers installed manually, you will find instruction bellow
- Your Mtk Smartphone Face a soft issue
- Original stock rom (you can find it above in download section)
- The latest SP Flashtool version
2-How to install VCOM Drivers:- Open device manager from my PC or my computer.
- Click on any item and go to actions > Add legacy hardware
- Now, press next and select install drivers manually
- Press next and click on have disk
- from the browse option, select VCOM drivers From mtk drivers folder
- Once its done. You will see a screen similar to this:
- Once you are done with the driver installation, go to device manager > Ports (COM&LPT) you will find a device similar to this:
3-How to flash rom using SP Flashtool?:- Power the phone off, remove the battery from the smartphone and put it back without booting the phone (if the battery is inside then simply switch it off).
- Launch SP Flashtool
*Double clicks onFlash_tool.exe
*Press OK
- Click on scatter-loading option and browse to the scatter file of your stock rom choose MTxxxx_android.txt (scatter.txt).
- Dont touch any options, Keep the original setting (In case you want to format device before flash press choose format+download but it'snt recommanded because you will be ended with an EMEI null)
- If you phone is alive and has a software issue (contain virus, Stuck on logo, apps setting problem, blink, or not work as expected) I advise you to Uncheck Preloader as a precaution. On contarary check all pertitions if you have a boot problem (you phone does'nt boot when you try to power on it).
- Once you are done with everything, click on the download button at the top of the software.
Stop should now be prominent while other options should be grayed out- Connect your switched off phone with battery inside to PC via Usb cable
- A progressbar should start running
- In the end of an success flash process, a box should show up with green OK symbol inside
- Disconnect the phone, remove the battery, slot it back in then power the phone.
ENJOY.
