XPERIA Z5 MT6572 MT6572__alps__Sony_Xperia_Z3__rtech72_we_72_kk__4.4.2__ALPS.KK1.MP6.V1.7z

SONY XPERIA Z5 CLONE MT6572 FAKE Z3 
TESTED FIRMWARE

Exclusive is for free

INFO:

Device Brand   : alps

Device Model   : rtech72_we_72_kk

Device CPU     : MT6572

Device IntName : rtech72_we_72_kk

Device Version : 4.4.2

Device Compile : 13/11/2015 10:48:16

Device Project : ALPS.KK1.MP6.V1

Device ExtInfo : Sony Xperia Z3

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 24 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6572

BB_CPU_NME : [MediaTek] MT6572_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x88

NAND Flash : NOT INSTALLED

eMMC Flash : 1101003030344745300154CA0A5E52AF

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x11 , OEM : 0100

[eMMC] : FLASH_INF : [TOSHIBA] , 0EG40

[eMMC] : FLASH_CID : 1101003030344745300154CA0A5E52AF

[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000

[eMMC] : FLASH_LEN : 0x00000000EC000000

[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]

DEV RID    : 0xECD5AB9A723B3916679CF86D84E33790

INT RAM    : 0x00020000

EXT RAM    : 0x20000000 [512 MiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

[AP] : Initial info read Ok!

Brand     : alps

ProdName  : rtech72_we_72_kk

ProdModel : Sony Xperia Z3

Device    : rtech72_we_72_kk

AndroidVer: 4.4.2

MTKxCPU   : MT6572

MTKxPRJ   : ALPS.KK1.MP6.V1

MODEM : 

BaseBand  : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V36_1_wg_n

EXTRA : 

LCD [0] : hx8389b_qhd_dsi_vdo_xl_boe

LCD [1] : ILI9807_dsi_vdo

LCD [2] : hx8389c_qhd_dsi_vdo

LCD [3] : rm68191_qhd_dsi_vdo

LCD [4] : otm9605a_qhd_dsi_video

LCD [5] : nt35517_qhd_dsi_vdo

LCD Res : 960#800x540#480

TOUCH [0] : GT9157

TOUCH [1] : ft6x36

TOUCH [2] : #GT9XX

TOUCH [3] : GT9158

CAM [0] : ov5645_mipi_yuv

CAM [1] :  ov7695_yuv gs5604mipi_yuv  gc0310mipi_yuv bf3a20_mipi_yuv gc2145mipi_yuv s5k4ecgx_mipi_yuv

CAM [2] : hi258_mipi_yuv

CAM [3] : hi704_yuv

CAM [4] : ov5645_mipi_yuv

CAM [5] : gc2035mipi_yuv

CAM [6] : gc0329_yuv

CAM [7] : s5k5eayx_yuv

MODEM : P900_band_1_5_gps_co_clock_dual_sim_co_desk

LOCALE : en_US es_ES zh_CN zh_TW ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG  th_TH  pt_PT   nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ iw_IL my_ZG km_KH ko_KR pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB fa_IR hi_IN

PRE-REQUISITE

• This is for Sony Z5 Clone Clone only.
• Your device must have 70% Of battery.
• You need a Laptop or PC to perform this Action.
• Download the right firmware for Sony Z5 Clone from the link bellow.
• Make sure you have followed the steps properly. Don’t Skip and Read!
• We are not responsible for any damage that you make to your Phone.

WHY YOU NEED TO FLASH YOUR PHONE!!

You need this firmware/stock rom if you have encountered this kind of problem in your Smartphone Listed Below:

1.Hang on logo.
2.Rebooting.
3.Bootloop & Dead boot after a wrong software.
4-Virus & Sexual Apps.
5-System crashing

How to know if the phone had a hard problem (Emmc problem)??

• What is Emmc problem? also called read mode only,  it means that your internal memory doesnt accept command, so the phone stay on the same condition after a software or a hard reset.
•  if the phone hang on logo after flash, you ara facing Emmc problem.
• As a precaution you shouldn't change setting in SP flashtool from Download only to format+download, you will end with a dead phone if you have a Emmc problem ofcourse.

DOWNLOAD AREA:

Firmware Download Link: FROM HERE
Password For Firmware: www.freemobilefirmware.com

SP Flashtool Downloadlink: SPFlashTool 5.1628
Drivers Download Link: Mobile Mtk Drivers

REMARQUE:

MAKE BACKUP BEFORE FLASH

How To Flash Via SP FLASHTOOL?

1-Requirements:

1. • A Computer PC Run Windows XP or above
   • Usb data cable (not a generic cable)
   • Mtk usb drivers installed manually, you will find instruction bellow
   • Your Mtk Smartphone Face a soft issue
   • Original stock rom (you can find it above in download section)
   • The latest SP Flashtool version
   
   
   2-How to install VCOM Drivers:
   • Open device manager from my PC or my computer.
   • Click on any item and go to actions > Add legacy hardware
   • Now, press next and select install drivers manually
   • Press next and click on have disk
   • from the browse option, select VCOM drivers From mtk drivers folder
   • Once its done. You will see a screen similar to this:
   
   
   
   
   
   
   
   
   
   • Once you are done with the driver installation, go to device manager > Ports (COM&LPT) you will find a device similar to this:
   
   
   
   
   
   
   
   3-How to flash rom using SP Flashtool?:
   
   
   • Power the phone off, remove the battery from the smartphone and put it back without booting the phone (if the battery is inside then simply switch it off).
   • Launch SP Flashtool 
   
   
   
   *Double clicks onFlash_tool.exe
   
                                          *Press OK
   
   
   
   
   
   
   
   
   
   
   
   
   
   • Click on scatter-loading option and browse to the scatter file of your stock rom choose MTxxxx_android.txt (scatter.txt).
   
   
   
   
   
   
   
   
   
   
   • Dont touch any options, Keep the original setting (In case you want to format device before flash press choose format+download but it'snt recommanded because you will be ended with an EMEI null)
   • If you phone is alive and has a software issue (contain virus, Stuck on logo, apps setting problem, blink, or not work as expected) I advise you to Uncheck Preloader as a precaution. On contarary check all pertitions if you have a boot problem (you phone does'nt boot when you try to power on it).
                                  
   
   
   
   • Once you are done with everything, click on the download button at the top of the software.
   
   
   
   
   
   
   
   Stop should now be prominent while other options should be grayed out
   
   
   
   
   • Connect your switched off phone with battery inside to PC via Usb cable
   • A progressbar should start running
   
   
   
   
   
   • In the end of an success flash process, a box should show up with green OK symbol inside
   
   
   
   
   
   • Disconnect the phone, remove the battery, slot it back in then power the phone.

ENJOY.