SONY XPERIA Z5 MT6572__lmkj__Z5__Z5__5.0.2__ALPS.KK1.MP7.V1
Navigation

SONY XPERIA Z5 MT6572__lmkj__Z5__Z5__5.0.2__ALPS.KK1.MP7.V1

GUIDE TO FLASH SONY XPERIA Z5 CLONE
MT6572 TESTED FIRMWARE
Exclusive is for free
SONY XPERIA Z5 MT6572__lmkj__Z5__Z5__5.0.2__ALPS.KK1.MP7.V1

INFO:

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164048601A3F58AA037
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164048601A3F58AA037
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID    : 0xECD5AB9A998133DFE28E80CD5AD70F67
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

Brand     : lmkj
ProdName  : Z5
ProdModel : Z5
Device    : Z5
AndroidVer: 5.0.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1

[Read Ok] : preloader_lokyee72_cwet_kk_m11.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / lokyee72_cwet_kk_m11 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 836 MiB

MT6572__lmkj__Z5__Z5__5.0.2__ALPS.KK1.MP7.V1\

MERACLE BOX INFO:
Connected to Phone.
  CPU: MT6572 SW:0000 Ver: CA01
  Downloading Boot8 ...
  EMMC Size: 0x00EC000000
  Flash Type: EMMC
  INT/EXT RAM  Size: 0x0+0x0
  Reading infr(EMMC)...
  id:m11v20_dhd_a01_c_001_qhd_en_v08
  version:5.0.2
  model:Z5
  brand:lmkj
  manufacturer:leimin
  PRELOADER  BaseAddr:0x0  Size:0x880000
  MBR  BaseAddr:0x880000  Size:0x80000
  EBR1  BaseAddr:0x900000  Size:0x80000
  PRO_INFO  BaseAddr:0x980000  Size:0x300000
  NVRAM  BaseAddr:0xC80000  Size:0x500000
  PROTECT_F  BaseAddr:0x1180000  Size:0xA00000
  PROTECT_S  BaseAddr:0x1B80000  Size:0xA00000
  SECCFG  BaseAddr:0x2580000  Size:0x20000
  UBOOT  BaseAddr:0x25A0000  Size:0x60000
  BOOTIMG  BaseAddr:0x2600000  Size:0x600000
  RECOVERY  BaseAddr:0x2C00000  Size:0x600000
  SEC_RO  BaseAddr:0x3200000  Size:0x40000
  MISC  BaseAddr:0x3240000  Size:0x80000
  LOGO  BaseAddr:0x32C0000  Size:0x300000
  EXPDB  BaseAddr:0x35C0000  Size:0xA00000
  ANDROID  BaseAddr:0x3FC0000  Size:0x32000000
  CACHE  BaseAddr:0x35FC0000  Size:0xE200000
  USRDATA  BaseAddr:0x441C0000  Size:0xA6DC0000
  BMTPOOL  BaseAddr:0xFFFF0000  Size:0x1500000
  BaseAddr:0x0  Size:0x0


PRE-REQUISITE
  • This is for Sony Z5 Clone Clone only.
  • Your device must have 70% Of battery.
  • You need a Laptop or PC to perform this Action.
  • Download the right firmware for Sony Z5 Clone from the link bellow.
  • Make sure you have followed the steps properly. Don’t Skip and Read!
  • We are not responsible for any damage that you make to your Phone.


WHY YOU NEED TO FLASH YOUR PHONE!!

You need this firmware/stock rom if you have encountered this kind of problem in your Smartphone Listed Below:


1.Hang on logo.
2.Rebooting.
3.Bootloop & Dead boot after a wrong software.
4-Virus & Sexual Apps.
5-System crashing




How to know if the phone had a hard problem (Emmc problem)??
  • What is Emmc problem? also called read mode only,  it means that your internal memory doesnt accept command, so the phone stay on the same condition after a software or a hard reset.
  •  if the phone hang on logo after flash, you ara facing Emmc problem.
  • As a precaution you shouldn't change setting in SP flashtool from Download only to format+download, you will end with a dead phone if you have a Emmc problem ofcourse.



DOWNLOAD AREA:

Firmware Download Link: MT6572__lmkj__Z5__Z5__5.0.2__ALPS.KK1.MP7.V1
Password For Firmware: From here
SP Flashtool Downloadlink: SPFlashTool 5.1628
Drivers Download Link: Mobile Mtk Drivers



REMARQUE:
MAKE BACKUP BEFORE FLASH




How To Flash Via SP FLASHTOOL?

1-Requirements:
    • A Computer PC Run Windows XP or above
    • Usb data cable (not a generic cable)
    • Mtk usb drivers installed manually, you will find instruction bellow
    • Your Mtk Smartphone Face a soft issue
    • Original stock rom (you can find it above in download section)
    • The latest SP Flashtool version

    2-How to install VCOM Drivers:
    • Open device manager from my PC or my computer.
    • Click on any item and go to actions > Add legacy hardware
    • Now, press next and select install drivers manually
    • Press next and click on have disk
    • from the browse option, select VCOM drivers From mtk drivers folder
    • Once its done. You will see a screen similar to this:




    • Once you are done with the driver installation, go to device manager > Ports (COM&LPT) you will find a device similar to this:



    3-How to flash rom using SP Flashtool?:

    • Power the phone off, remove the battery from the smartphone and put it back without booting the phone (if the battery is inside then simply switch it off).
    • Launch SP Flashtool 

    *Double clicks onFlash_tool.exe
                                           *Press OK






    • Click on scatter-loading option and browse to the scatter file of your stock rom choose MTxxxx_android.txt (scatter.txt).




    • Dont touch any options, Keep the original setting (In case you want to format device before flash press choose format+download but it'snt recommanded because you will be ended with an EMEI null)
    • If you phone is alive and has a software issue (contain virus, Stuck on logo, apps setting problem, blink, or not work as expected) I advise you to Uncheck Preloader as a precaution. On contarary check all pertitions if you have a boot problem (you phone does'nt boot when you try to power on it).
                                   

    • Once you are done with everything, click on the download button at the top of the software.



    Stop should now be prominent while other options should be grayed out


    • Connect your switched off phone with battery inside to PC via Usb cable
    • A progressbar should start running


    • In the end of an success flash process, a box should show up with green OK symbol inside


    • Disconnect the phone, remove the battery, slot it back in then power the phone.

ENJOY.

                                      
Share