HOW TO UPDATE YOUR SAMSUNG GALAXY TAB S3 (LTE) SM-T820 TO ANDROID 7.0 NOUGAT
Mobile : Galaxy Tab S3 (LTE)
Model : SM-T825
System Version : Nougat 7.0
Baseband : XEF T825XXU1AQBB
Model : SM-T825
System Version : Nougat 7.0
Baseband : XEF T825XXU1AQBB
TESTED FIRMWARE DOWNLOAD LINK:
ODIN FLASHER DOWNLOAD LINK:
How to update Galaxy TAB S3 SM-T825 (Wifi) to Android 7.0 Nougat:
1- Unzip Odin on your computer and install it.
2-Unzip firmware zip file in the same folder as Odin.
3-Switch your Samsung Galaxy TAB S3 off and boot it in Download mode: press and hold Volume Down and Power together and then press the Home key.
4-Open Odin and connect your Tab with your computer. When connected successfully, one of the ID:COM boxes will turn yellow with the COM port number after a while. (In case you don’t get it, try another USB port. If that doesn’t help either, then re-install USB drivers).
5-On your Odin, select files:
-Click on AP and select file with AP in its name.
-Click on CP and select file with MODEM in its name – ignore if you didn’t get any such file.
-Click on CSC and select file with CSC in its name – ignore if you didn’t get any such file.
-Click on PIT and select the. pit file – ignore if you didn’t get any such file.
-Click on BL and select file with BL in its name – ignore if there is no such file.
-Make sure to check Auto Reboot and F.Rest Time. Check Re-Partition only if you selected the .pit file.
6-Click on Start to initiate the update process.
7-When Android 7.0 Nougat update installation is successfully completed, you will get a PASS message.
8-Your smartphone will now reboot. Once you see the home screen, you can disconnect your Samsung Galaxy Tab S3 SM-T825 and reboot it.
 TO ANDROID 7.0 NOUGAT){kind=link}