PANASONIC T44 MT6580 MARSHMALLOW 6.0 TESTED FIRMWARE FREE
INFO:
id:EB-90S40T44v1021
version:6.0
model:Panasonic T44
brand:Panasonic
manufacturer:PANASONIC
PROINFO BaseAddr:0x80000 Size:0x300000
NVRAM BaseAddr:0x380000 Size:0x500000
PROTECT1 BaseAddr:0x880000 Size:0xA00000
PROTECT2 BaseAddr:0x1280000 Size:0xA00000
SECCFG BaseAddr:0x1C80000 Size:0x40000
LK BaseAddr:0x1CC0000 Size:0x60000
BOOT BaseAddr:0x1D20000 Size:0x1000000
RECOVERY BaseAddr:0x2D20000 Size:0x1000000
PARA BaseAddr:0x3D20000 Size:0x80000
LOGO BaseAddr:0x3DA0000 Size:0x800000
EXPDB BaseAddr:0x45A0000 Size:0xA00000
FRP BaseAddr:0x4FA0000 Size:0x100000
NVDATA BaseAddr:0x50A0000 Size:0x2000000
METADATA BaseAddr:0x70A0000 Size:0x2760000
OEMKEYSTORE BaseAddr:0x9800000 Size:0x200000
SECRO BaseAddr:0x9A00000 Size:0x600000
KEYSTORE BaseAddr:0xA000000 Size:0x800000
SYSTEM BaseAddr:0xA800000 Size:0xA0000000
CACHE BaseAddr:0xAA800000 Size:0x10000000
USERDATA BaseAddr:0xBA800000 Size:0x116780000
FLASHINFO BaseAddr:0x1D0F80000 Size:0x1000000
Done.
SP Flashtool Downloadlink: SPFlashTool 5.1744
Drivers Download Link: Mobile Mtk Drivers
PRE-REQUISITE
- This is for Iphone 6S Plus Clone only.
- Your device must have 70% Of battery.
- You need a Laptop or PC to perform this Action.
- Download the right firmware for
- Iphone 6S Plus
- clone from the link bellow.
- Make sure you have followed the steps properly. Don’t Skip and Read!
- We are not responsible for any damage that you make to your Phone
WHY YOU NEED TO FLASH YOUR PHONE!!
You need this firmware/stock rom if you have encountered this kind of problem in your Smartphone Listed Below:
1.Hang on logo.
2.Rebooting.
3.Bootloop & Dead boot after a wrong software.
4-Virus & Sexual Apps.
5-System crashing
2.Rebooting.
3.Bootloop & Dead boot after a wrong software.
4-Virus & Sexual Apps.
5-System crashing
How to know if the phone had a hard problem (Emmc problem)??
- What is Emmc problem? also called read mode only, it means that your internal memory doesnt accept command, so the phone stay on the same condition after a software or a hard reset.
- if the phone hang on logo after flash, you ara facing Emmc problem.
- As a precaution you shouldn't change setting in SP flashtool from Download only to format+download, you will end with a dead phone if you have a Emmc problem ofcourse.
How To Flash:
- Its a Scatter file you can flash it with SP Flash Tool or any Flasher Box
- Select “scatter-Loading” and Slect MT6580_Android_scatter.txt in folder
- Wait file to be added into Flash Tool Or Any Flashing box
- Select “Download Only” or if upgrade “Firmware upgrade” in Flash Tool
- Turn off your phone
- Press “Download” Button to start
- And connect your phone with PC via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
- its Done..!
