Samsung Galaxy S6 Edge+ SM-G928F Marshmallow 6.0.1
Model : SM-G928F
System Version : Marshmallow 6.0.1
Baseband : NEE G928FXXS2BPH2
FIRMWARE DOWNLOAD LINK:
ODIN TOOL;
- Unzip Odin on your computer and install it.
- Unzip firmware zip file in the same folder as Odin.
- Switch your Samsung Galaxy S6 Edge+ off and boot it in Download mode: press and hold Volume Down and Power together and then press the Home key.
- Open Odin and connect your smartphone with your computer. When connected successfully, one of the ID:COM boxes will turn yellow with the COM port number after a while. (In case you don’t get it, try another USB port. If that doesn’t help either, then re-install USB drivers).
- On your Odin, select files:
- Click on AP and select file with AP in its name.
- Click on CP and select file with MODEM in its name – ignore if you didn’t get any such file.
- Click on CSC and select file with CSC in its name – ignore if you didn’t get any such file.
- Click on PIT and select the. pit file – ignore if you didn’t get any such file.
- Click on BL and select file with BL in its name – ignore if there is no such file.
- Make sure to check Auto Reboot and F.Rest Time. Check Re-Partition only if you selected the. pit file.
- Click on Start to initiate the update process.
- When Android 6.0.1 Marshmallow update installation is successfully completed, you will get a PASS message.
- Your smartphone will now reboot. Once you see the home screen, you can disconnect your Samsung Galaxy S6 Edge+ and reboot it.
