GUIDE TO SAMSUNG GALAXY A3
SM-A300F/FU/H/M/Y/YZ/0/09 Android 5.0.2/5.1.1/6.0.1
USING ODIN FLASHER
SM-A300F/FU/H/M/Y/YZ/0/09 Android 5.0.2/5.1.1/6.0.1
USING ODIN FLASHER
Important Things To Do Before Flashing Stock ROM:
Before you can proceed to the process make sure that you do the things we will list below and that you read it carefully, this procedure works perfectly and tested by many users, so if you have doubt or questions about this post you can leave a comment below:
- Prepare your USB Cable, PC, STOCK ROM or Firmware Files (Download Below).
- Flashing the Stock Firmware will delete your personal data from the device. If in case you are going to Flash the above firmware then take a backup of your personal data, so that you can recover your personal data if any thing wrong happens.
- Also doing this process is crucial so we admit you have a presence of mind, common sense, and read our disclaimer below, as well as make sure you have at least 60% to 80%.
Why Need Stock Firmware?
- Flashing Stock ROM will downgrade your phone if you don’t like the new update.
- Flashing Stock ROM will Upgrade your phone.
- Flashing Stock ROM will fix bootloop issues.
- Flashing Stock ROM will completely Unroot .
- Installing Stock ROM will Unbrick.
- Flashing Stock ROM will help to Revert back to Original Stock ROM Firmware or Factory state (Helpful if you are facing force close error or any other lags or unstable internet connection).
Download Area:
1-Firmwares Download Link: (A300H/M & A300Y Have android 5.1.1 & 6.0.1)
Samsung Galaxy A300F Lollipop 5.0.2: From Here
Samsung Galaxy A300FU Lollipop 5.0.2: Here
Samsung Galaxy A300G Lollipop 5.0.2: Click Here
Samsung Galaxy A300YZ Lollipop 5.0.2: Here
Samsung Galaxy A3000 Lollipop 5.0.2: From Here
Samsung Galaxy A3009 Lollipop 5.0.2: Here
Samsung Galaxy A300H Lollipop 5.1.1: From Here
Samsung Galaxy A300M Lollipop 5.1.1: Here
Samsung Galaxy A300Y Marshmallow 6.0.1: From here
Download Latest Odin Flasher from here.
Install Smart Switch for install latest samsung drivers from here.
Fellow Video Tutorial How To Flash?
⧭⧭⧭⧭⧭⧭
How to Flash Samsung Galaxy A3:
Step 1: Download the Odin software and the right firmware for your set , See downloads section above.
Step 2: Extract Android firmware file.
Step 3: Extract Odin file.
Step 4: Switch off your Galaxy A3 from PC, boot it into download mode. To achieve this, wait for six to seven seconds after screen goes off, and long press Volume Down + Power + Home buttons until warning screen is displayed. Then press, Volume Up to proceed to download mode.
Step 5: Interface your phone to PC using USB cable. In Odin you should see an "Added" message appearing in the Log box at the bottom left, and the first box under ID:COM will also change its background colour to Blue.
Step 6: Load firmware into Odin. To achieve this, Click on the AP button on Odin and the select the .tar.md5 extracted file as explained in Step 3.
Step 7: Within Odin, check to ensure that Re-partition checkbox is deselected,
Step 8: Within Odin, select Start Button to start flashing the firmware on your tablet.
Step 9: After completion of installation, your Galaxy A3 will reboot automatically. You'll get a "Pass" message upon successful installation from Odin.
Step 10: Disconnect your tablet from the computer. Navigate to Settings > About Device to verify installation of new firmware.
Download Latest Odin Flasher from here.
Install Smart Switch for install latest samsung drivers from here.
