GUIDE TO FLASH CONDOR PLUME P6 PRO PGN518 MT6580 ALL VERSIONS
PRE-REQUISITE
- This is for Condor P6 PRO only.
- Your device must have 70% Of battery.
- You need a Laptop or PC to perform this Action.
- Download the right firmware for Condor P6 PRO from the link bellow.
- Make sure you have followed the steps properly. Don’t Skip and Read!
- We are not responsible for any damage that you make to your Phone.
WHY YOU NEED TO FLASH YOUR PHONE!!
You need this firmware/stock rom if you have encountered this kind of problem in your Smartphone Listed Below:
1.Hang on logo.
1.Hang on logo.
2.Rebooting.
3.Bootloop & Dead boot after a wrong software.
4-Virus & Sexual Apps.
5-System crashing
3.Bootloop & Dead boot after a wrong software.
4-Virus & Sexual Apps.
5-System crashing
How to know if the phone had a hard problem (Emmc problem)??
- What is Emmc problem? also called read mode only, it means that your internal memory doesnt accept command, so the phone stay on the same condition after a software or a hard reset.
- if the phone hang on logo after flash, you ara facing Emmc problem.
- As a precaution you shouldn't change setting in SP flashtool from Download only to format+download, you will end with a dead phone if you have a Emmc problem ofcourse.
REMARQUE:
MAKE BACKUP BEFORE FLASH
DOWNLOAD AREA:
PLUME P6 PRO T5493 (factory firmware)
Brand : condor
ProdName : PGN518
ProdModel : PGN518
Device : PGN518
AndroidVer: 5.1
MTKxCPU : MT6580
MTKxPRJ : WBW5616AC_0301_T5493
FIRMWARE DOWNLOAD LINK: PLUME P6 PRO T5493
SP Flashtool Downloadlink: SPFlashTool 5.1628
Drivers Download Link: Mobile Mtk Drivers
PLUME P6 PRO T5636
Brand : condor
ProdName : PGN518
ProdModel : PGN518
Device : PGN518
AndroidVer: 5.1
MTKxCPU : MT6580
MTKxPRJ : WBW5616AC_0301_T5636
FIRMWARE DOWNLOAD LINK: PLUME P6 PRO T5636
SP Flashtool Downloadlink: SPFlashTool 5.1628
Drivers Download Link: Mobile Mtk Drivers
PLUME P6 PRO T5697
Brand : condor
ProdName : PGN518
ProdModel : PGN518
Device : PGN518
AndroidVer: 5.1
MTKxCPU : MT6580
MTKxPRJ : WBW5616AC_0301_T5697
FIRMWARE DOWNLOAD LINK: PLUME P6 PRO T5697
SP Flashtool Downloadlink: SPFlashTool 5.1628
Drivers Download Link: Mobile Mtk Drivers
PLUME P6 PRO T5824
Brand : condor
ProdName : PGN518
ProdModel : PGN518
Device : PGN518
AndroidVer: 5.1
MTKxCPU : MT6580
MTKxPRJ : WBW5616AC_0301_T5824
FIRMWARE DOWNLOAD LINK:
SP Flashtool Downloadlink: SPFlashTool 5.1628
Drivers Download Link: Mobile Mtk Drivers
PLUME P6 PRO T5966
Brand : condor
ProdName : PGN518
ProdModel : PGN518
Device : PGN518
AndroidVer: 5.1
MTKxCPU : MT6580
MTKxPRJ : WBW5616AC_0301_T5966
FIRMWARE DOWNLOAD LINK:
SP Flashtool Downloadlink: SPFlashTool 5.1628
Drivers Download Link: Mobile Mtk Drivers
PLUME P6 PRO T8238
Brand : condor
ProdName : PGN518
ProdModel : PGN518
Device : PGN518
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : WBW5616AC_0301_T8238
FIRMWARE DOWNLOAD LINK: PLUME P6 PRO T8238
password: FROM HERE
SP Flashtool Downloadlink: SPFlashTool 5.1628
Drivers Download Link: Mobile Mtk Drivers
FELLOW VIDEO INSTRUCTIONS:
⧭⧭⧭⧭
How To Flash Via SP FLASHTOOL?
- A Computer PC Run Windows XP or above
- Usb data cable (not a generic cable)
- Mtk usb drivers installed manually, you will find instruction bellow
- Your Mtk Smartphone Face a soft issue
- Original stock rom (you can find it above in download section)
- The latest SP Flashtool version
2-How to install VCOM Drivers:- Open device manager from my PC or my computer.
- Click on any item and go to actions > Add legacy hardware
- Now, press next and select install drivers manually
- Press next and click on have disk
- from the browse option, select VCOM drivers From mtk drivers folder
- Once its done. You will see a screen similar to this:
- Once you are done with the driver installation, go to device manager > Ports (COM&LPT) you will find a device similar to this:
3-How to flash rom using SP Flashtool?:- Power the phone off, remove the battery from the smartphone and put it back without booting the phone (if the battery is inside then simply switch it off).
- Launch SP Flashtool
*Double clicks onFlash_tool.exe*Press OK- Click on scatter-loading option and browse to the scatter file of your stock rom choose MTxxxx_android.txt (scatter.txt).
- Dont touch any options, Keep the original setting (In case you want to format device before flash press choose format+download but it'snt recommanded because you will be ended with an EMEI null)
- If you phone is alive and has a software issue (contain virus, Stuck on logo, apps setting problem, blink, or not work as expected) I advise you to Uncheck Preloader as a precaution. On contarary check all pertitions if you have a boot problem (you phone does'nt boot when you try to power on it).
- Once you are done with everything, click on the download button at the top of the software.
Stop should now be prominent while other options should be grayed out- Connect your switched off phone with battery inside to PC via Usb cable
- A progressbar should start running
- In the end of an success flash process, a box should show up with green OK symbol inside
- Disconnect the phone, remove the battery, slot it back in then power the phone.
ENJOY.