Flash Condor griffe G2 PKT411 Android 4.4 Tested Firmware (Exclusive)

Guide To Flash Condor griffe G2 PKT411 MT6572

PRE-REQUISITE

• This is for Alcatel Idol 6030X only.
• Your device must have 70% Of battery.
• You need a Laptop or PC to perform this Action.
• Download the right firmware for Alcatel Idol 6030X from the link bellow.
• Make sure you have followed the steps properly. Don’t Skip and Read!
• We are not responsible for any damage that you make to your Phone.

WHY YOU NEED TO FLASH YOUR PHONE!!

You need this firmware/stock rom if you have encountered this kind of problem in your Smartphone Listed Below:

1.Hang on logo.
2.Rebooting.
3.Bootloop & Dead boot after a wrong software.
4-Virus & Sexual Apps.
5-System crashing

How to know if the phone had a hard problem (Emmc problem)??

• What is Emmc problem? also called read mode only,  it means that your internal memory doesnt accept command, so the phone stay on the same condition after a software or a hard reset.
•  if the phone hang on logo after flash, you ara facing Emmc problem.
• As a precaution you shouldn't change setting in SP flashtool from Download only to format+download, you will end with a dead phone if you have a Emmc problem ofcourse.

DOWNLOAD AREA:

Firmware Download Link: FROM HERE

Password For Firmware: palestinealgerie

SP Flashtool Downloadlink: SPFlashTool 5.1628

Drivers Download Link: Mobile Mtk Drivers

REMARQUE:

MAKE BACKUP BEFORE FLASH

  Fiche technique du Condor Griffe G2 :

Designation	Valeur
CPU	Dual Core 1Ghz
RAM	512 Mo
Mémoire interne	4 Go
Systeme d’exploitation	Android 4.4.2 (Kitkat)
Réseaux	Wifi 802.11 b/g/n, Bluetooth 4.0
Port USB	Micro USB 2.0
Appareil photo	Arrière : 2MP / Avant : VGA 0.3MP
Batterie	Li-ion battery 3.8V, 1950 mAh
Chargeur	Input: AC 100-240v, 50-60 Hz / Output: DC 5.0v–400 mA
Carte mémoire	Emplacement MicroSD (jusqu’a 32 Go)
Carte sim	2 x Sim, EDGE/GPRS/GSM/WCDMA
Ecran	4″ IPS Screen, 480×800
Audio	Prise jack 3.5mm, Haut parleur
Radio	Oui
Dimensions	126.1mm x 64.1mm x 10.9mm
Poids	125 g
Capteurs	lumière, proximité, gravité, accéléromètre, GPS
Capacité tactile	Capacitive 3 doigts

Fellow Video Instructions:
🔻🔻🔻

How To Flash Via SP FLASHTOOL?

1. • A Computer PC Run Windows XP or above
   • Usb data cable (not a generic cable)
   • Mtk usb drivers installed manually, you will find instruction bellow
   • Your Mtk Smartphone Face a soft issue
   • Original stock rom (you can find it above in download section)
   • The latest SP Flashtool version
   
   
   2-How to install VCOM Drivers:
   • Open device manager from my PC or my computer.
   • Click on any item and go to actions > Add legacy hardware
   • Now, press next and select install drivers manually
   • Press next and click on have disk
   • from the browse option, select VCOM drivers From mtk drivers folder
   • Once its done. You will see a screen similar to this:
   
   
   
   
   
   
   
   
   
   • Once you are done with the driver installation, go to device manager > Ports (COM&LPT) you will find a device similar to this:
   
   
   
   
   
   
   
   3-How to flash rom using SP Flashtool?:
   
   
   • Power the phone off, remove the battery from the smartphone and put it back without booting the phone (if the battery is inside then simply switch it off).
   • Launch SP Flashtool 
   
   
   
   *Double clicks onFlash_tool.exe
   
                                          *Press OK
   
   
   
   
   
   
   
   
   
   
   
   
   
   • Click on scatter-loading option and browse to the scatter file of your stock rom choose MTxxxx_android.txt (scatter.txt).
   
   
   
   
   
   
   
   
   
   
   • Dont touch any options, Keep the original setting (In case you want to format device before flash press choose format+download but it'snt recommanded because you will be ended with an EMEI null)
   • If you phone is alive and has a software issue (contain virus, Stuck on logo, apps setting problem, blink, or not work as expected) I advise you to Uncheck Preloader as a precaution. On contarary check all pertitions if you have a boot problem (you phone does'nt boot when you try to power on it).
                                  
   
   
   
   • Once you are done with everything, click on the download button at the top of the software.
   
   
   
   
   
   
   
   Stop should now be prominent while other options should be grayed out
   
   
   
   
   • Connect your switched off phone with battery inside to PC via Usb cable
   • A progressbar should start running
   
   
   
   
   
   • In the end of an success flash process, a box should show up with green OK symbol inside
   
   
   
   
   
   • Disconnect the phone, remove the battery, slot it back in then power the phone.

ENJOY.